单推力航天器交会对接轨迹规划及跟踪控制

针对单推力航天器交会对接问题，提出一种轨迹规划及跟踪算法。首先，考虑到追踪航天器只沿本体X轴安装推力器，且推力方向固定，为了实现从起始位置转移至期望位置并满足姿态要求，基于三维螺旋线设计两阶段转移轨迹，根据初末位置以及末端速度方向要求，求解螺旋线参数。该螺旋线可以保证在初末速度方向固定情况下，曲率积分最小。其次，为了降低轨迹跟踪难度并减小初始时刻的位置跟踪控制力，需要将转移轨迹初始速度与追踪星X轴重合。传统螺旋线无法满足该约束条件。本文对传统螺旋线进行改进，提出一种旋转螺旋线轨迹设计方法。通过引入姿态旋转矩阵，将螺旋线在三维空间旋转，在不改变曲线形状的前提下满足初末位置及速度方向要求。然后，为了跟踪转移轨迹以及跟踪期望推力方向，提出基于CLF（Control Lyapunov Function）的滑模控制策略，当追踪星X轴与期望推力方向夹角较大时，采用CLF，保证最优性；当姿态误差收敛至滑模面附近时，切换为滑模控制，以提升系统鲁棒性。最后，通过仿真验证旋转螺旋线相比于传统螺旋线的优势。     

基于RNP的A＊算法动态航路规划研究

介绍了A＊算法的基本思想,建立了基于RNP的航路模型,利用A＊算法对航路进行了优化,并利用MATLAB程序对航路进行了算法实现,得到了满意的结论。通过实例分析得出基于RNP的A＊算法对航路进行规划研究的可行性和有效性。在MATLAB环境下进行航路规划问题的A＊算法程序,能够利用其强大的运算能力,并且易于其他工具包结合进行算法仿真实现对其中参数进行优化研究。     

基于CPSO的UAV编队集结路径规划

针对多无人机编队集结路径规划问题,提出了具有合作机制的分布式协同粒子群(CPSO)算法。为了满足无人机运动学约束,采用曲率连续的PH曲线作为备选路径。基于协同进化思想提出CPSO算法,为每架无人机规划出一条满足机间协同约束的最优安全可飞行路径。仿真结果表明,规划得到的多条路径能够满足无人机运动学约束、安全性及无人机之间的协同性要求;相比于协同进化遗传算法,CPSO算法搜索成功率更高,稳定性更好。     

A data-driven approach to modeling high-density terminal areas: A scenario analysis of the new Beijing,China airspace

Airports are being developed and expanded rapidly in China to accommodate and pro-mote a growing aviation market. The future Beijing Daxing International Airport (DAX) will serve as the central airport of the JingJinJi megaregion, knitting the Beijing, Tianjin, and Hebei regions together. DAX will be a busy airport from its inception, relieving congestion and accommodating growth from Beijing Capital International Airport (PEK), currently the second busiest airport in the world in passengers moved. We aim to model terminal airspace designs and possible conflicts in the future Beijing Multi-Airport System (MAS). We investigate standard arrival procedures and mathematically model current and future arrival trajectories into PEK and DAX by collecting large quantities of publicly available track data from historical arrivals operating within the Beijing terminal airspace. We find that (1) trajectory models constructed from real data capture aberrations and deviations from standard arrival procedures, validating the need to incorporate data on histor-ical trajectories with standard procedures when evaluating the airspace and (2) given all existing constraints, DAX may be restricted to using north and east arrival flows, constraining the capacity required to handle the increases in air traffic demand to Beijing. The results indicate that the termi-nal airspace above Beijing, and the future JingJinJi region, requires careful consideration if the full capacity benefits of the two major airports are to be realized.     

智能制造环境下的数控系统发展需求

"智能"是"中国制造2025"的核心要素,数控系统是制造装备实现智能化的关键要素。论文首先提出机床的信息互通和开放式标准数据接口是实现机床智能化的前提,举例说明了STEP-NC在通用数据接口方面的优越性,概述了适用于数控系统的通讯总线特征;在此基础上,介绍了工艺大数据对生产加工的重要性和其对新一代数控系统的要求,针对制造业数据平台的需求,对大数据信息挖掘技术做了相关介绍。依托于以上两点,总结了智能化数控系统可具备的功能,依托于工艺大数据平台,重点分析了智能工艺规划和加工参数自整定的实现方案,以及智能数控对高速高精加工所提供的便利。     

Air route network optimization in fragmented airspace based on cellular automata

Air route network optimization,one of the essential parts of the airspace planning,is an effective way to optimize airspace resources,increase airspace capacity,and alleviate air traffic con gestion.However,little has been done on the optimization of air route network in the fragmented airspace caused by prohibited,restricted,and dangerous areas (PRDs).In this paper,an air route network optimization model is developed with the total operational cost as the objective function while airspace restriction,air route network capacity,and non-straight-line factors (NSLF) are taken as major constraints.A square grid cellular space,Moore neighbors,a fixed boundary,together with a set of rules for solving the route network optimization model are designed based on cellular automata.The empirical traffic of airports with the largest traffic volume in each of the 9 flight information regions in mainland China is collected as the origin-destination (OD) air port pair demands.Based on traffic patterns,the model generates 35 air routes which successfully avoids 144 PRDs.Compared with the current air route network structure,the number of nodes decreases by 41.67％,while the total length of flight segments and air routes drop by 32.03％ and 5.82％ respectively.The NSLF decreases by 5.82％ with changes in the total length of the air route network.More importantly,the total operational cost of the whole network decreases by 6.22％.The computational results show the potential benefits of the model and the advantage of the algorithm.Optimization of air route network can significantly reduce operational cost while ensuring operation safety.     

基于企业战略规划的维修资源布局

主要分析在民航十三五规划及企业战略规划的背景下，航空公司应该如何配置和布局维修资源，以满足自身机队发展及维修保障能力提升的需要。     

粒子群算法在装配序列规划中的应用方法研究

将粒子群优化算法引入到装配序列规划中,详细讨论了粒子群算法在装配规划中的数学表示,给出了适应度函数评价方法,并实现了装配干涉矩阵的构建,以发动机化油器装配为例,分析了粒子群算法在装配序列规划中的具体应用.     

俄反恐突袭的巡航导弹技术状态初步分析

2015年10月7日，俄罗斯采用远距离、高精度、大威力的“口径”对陆攻击巡航导弹远程空袭ISIS目标，该事件得到了高度关注。简要介绍了“口径”巡航导弹，并对俄巡航导弹技术状态进行了初步分析。     

基于多种运行成本最小的机队优化配置研究

为节省航空公司运行成本开支，通过以燃油成本最小、时间成本最小、机场起降费用成本最小为目标函数，以飞机最大航程限制、机场起降条件限制、航班频率限制、旅客座次限制、飞机可用时间限制等为约束条件，建立多目标规划模型。通过实例计算，确定机队优化配置方案，验证了模型的正确性，为航空公司机队规划提供了参考。